Super UV Resistance Roof Liquid Waterproofing Asphalt Waterproof Coating

With moderate viscosity, it can be self-leveling after construction under normal temperature.Excellent physical & mechanical properties, good elasticity, high strength and firm bonding to base surface.Integral solidified film ability is high, and waterproof performance is good.Aging resistance, weather resistance, oil resistance and water resistance are remarkable and some acid &alkali resistance. Besides its performance life is long.

Features:
1. Two-component polyurethane Waterproof Coating, easy to apply.
2. With moderate viscosity, it can be self-leveling after construction under normal temperature.
3. Excellent physical & mechanical properties, good elasticity, high strength and firm bonding to base surface.
4. Integral solidified film ability is high, and waterproof performance is good.
5. Aging resistance, weather resistance, oil resistance and water resistance are remarkable and some acid &alkali resistance.Besides its performance life is long.
Application method:
1. Pour the liquid material into the container, then stir the powder into it. Keep stirring until it generate the mortar which is no powder block and smooth, and finish in the operating time.
2. Using stick, brush or rubber scraper to brush the mortar onto the base which has been treated evenly. You should brushing two layers or over according to the using environment and performance requirement.
3. In order to avoid the slurry accumulated too thick, you must use scraper to repair the uneven spot.
4. After finish brushing the first layer, you must wait for, when it has a little dry, then you can brush the second layer. If the first layer of brushing time has been over 24 hours, or the coating has been cured, you must use water to humidify the first coating, and then you can brush the second coating on it.

Points for attention
1. Substrate should be dry
2. Change the brushing direction alternately at per brushing layer. Make sure the overlap width reaches 30~50mm between sequential two brushing in the same coating film
3. Avoid the overlap been damaged, and its width should be more than 100mm. Clean its surface before the next brush
4. Brush several times in the last application area
5. Avoid stir too much SPU with water at one time, or the coating may solidified before using up
6. The coating should be used up after exposed to the outside unless stored in sealed container
7. Wear some protective clothing while application. Keep skin and eyes away from the coating

1. Q: Can I get sample and how long will it take?
· A: Yes. We can supply sample. And you need to pay for the sample and courier.About 10 days after receiving the payment, we will send it out.
2. Q: Can I have my own customized product?
·A: Yes. Your customized requirements for color, logo, design, package, carton mark, your language manual etc. We are very welcome
3. Q: Can I mix different models in one container?
· A: Yes. Different models can be mixed in one container.
4. Q: What is the payment terms?
· A: T/T, L/C and so on.(Contact with our customer servise.)
5. Q: How does your factory carry out quality control?
· A: We attach great importance to quality control. Every part of our products has its own QC.
6. How do you make our business long-term and goodrelationship?
· A:1)We keep good quality and competitive price to ensure our customers benefit;
     2)We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
7.Do you test all your goods before delivery?
· A: Yes, we have 100% test before delivery.